2019
[30] D. Rano and M. Hashmi, “A modified interdigital EBG reflector for wireless body area network applications,” Microwave and Optical Technology Letters, vol. 61, no. 4, pp. 912–919, 2019.
[31] R. Gupta, M. Maktoomi, V. V. Singh, and M. S. Hashmi, “High impedance transforming dual-band balun with isolation and output ports matching,” Progress In Electromagnetics Research Letters, vol. 81, pp. 121–126, 2019.
[32] D. Rano and M. Hashmi, “Extremely compact EBG-backed antenna for smartwatch applications in medical body area network,” IET Microwaves, Antennas & Propagation, vol. 13, no. 7, pp. 1031–1040, 2019.
[33] A. Khusro, M. S. Hashmi, A. Q. Ansari, A. Mishra, and M. Tarique, “An accurate and simplified small signal parameter extraction method for GaN HEMT,” International Journal of Circuit Theory and Applications, vol. 47, no. 6, pp. 941–953, 2019.
[34] V. Sharma, S. Malhotra, and M. Hashmi, “Slot Resonator Based Novel Orientation Independent Chipless RFID Tag Configurations,” IEEE Sensors Journal, vol. 19, no. 13, pp. 5153–5160, 2019.
[35] A. Khusro, M. S. Hashmi, and A. Q. Ansari, “Enabling the development of accurate intrinsic parameter extraction model for GaN HEMT using support vector regression (SVR),” IET Microwaves, Antennas & Propagation, vol. 13, no. 9, pp. 1457–1466, 2019.
[36] N. N. Anandakumar, S. K. Sanadhya, and M. S. Hashmi, “FPGA-based true random number generation using programmable delays in oscillator-rings,” IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 67, no. 3, pp. 570–574, 2019.
[37] M. Hashmi, M. Das, S. Sanadhya, and A. Kumar, “Reconfigurable hardware architecture for authenticated key agreement protocol over binary edwards curve,” 2019.
[38] R. H. Caverly et al., “NRZ, Duobinary, or PAM4?,” 2019.
[39] G. Kaur, A. Q. Ansari, and M. S. Hashmi, “Fractional Order High Pass Filter Based on Operational Transresistance Amplifier with Three Fractional Capacitors of Different Order,” Advances in Electrical and Electronic Engineering, vol. 17, no. 2, pp. 155–166, 2019.
[40] R. H. Caverly et al., “Microwave Sensing and Sleep,” 2019.
[41] R. H. Caverly et al., “2019 IEEE Fellows Elevation and Recognition”.
[42] D. Banerjee, A. Saxena, and M. Hashmi, “A Novel Design of a Bandwidth Enhanced Dual-Band Impedance Matching Network with Coupled Line Wave Slowing,” in 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), 2019, pp. 1770–1773.
[43] A. Saxena, D. Banerjee, M. Hashmi, and M. Auyenur, “A Dual-Band Impedance Transfomer for Matching Frequency Dependent Complex Source and Load Impedances,” in 2019 15th Conference on Ph. D Research in Microelectronics and Electronics (PRIME), 2019, pp. 173–176.
[44] A. Khusro, S. Hussain, M. Hashmi, M. Auyenur, and A. Ansari, “A Reliable and Fast ANN Based Behavioral Modeling Approach for GaN HEMT,” in 2019 16th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), 2019, pp. 277–280.
[45] A. Khusro, M. S. Hashmi, A. Q. Ansari, and M. Auyenur, “A new and Reliable Decision Tree Based Small-Signal Behavioral Modeling of GaN HEMT,” in 2019 IEEE 62nd International Midwest Symposium on Circuits and Systems (MWSCAS), 2019, pp. 303–306.
[46] S. Malhotra and M. Hashmi, “Near-Field WPT using Defected Ground Structures for UHF RFID Applications,” in 2019 IEEE International Conference on RFID Technology and Applications (RFID-TA), 2019, pp. 16–21.
[47] D. Rano and M. S. Hashmi, “Determination of Effective Dielectric Constant and Resonant Frequency of Microstrip Patch Antenna with Multilayered Superstrate Structures,” in 2019 49th European Microwave Conference (EuMC), 2019, pp. 81–84.
[48] V. Sharma and M. Hashmi, “Chipless RFID Reader for Wide Range Applications,” in 2019 IEEE International Conference on Consumer Electronics-Asia (ICCE-Asia), 2019, pp. 39–40.
[49] S. K. Sanadhya, M. S. Hashmi, and others, “Design, implementation and analysis of efficient hardware-based security primitives,” phdthesis, IIIT-Delhi, 2019.
[50] S. Malhotra, S. Verma, V. Bohara, and M. Hashmi, “Dual-band WPT system using Semi-H DGS for Biomedical Applications,” in 2019 IEEE Asia-Pacific Microwave Conference (APMC), 2019, pp. 720–722.
[51] R. Gupta, V. V. Singh, and M. Hashmi, “A Power Divider Utilizing Stepped Impedance Transformers for Real/Complex Port Terminations,” in 2019 IEEE Asia-Pacific Microwave Conference (APMC), 2019, pp. 312–314.
[52] K. Dautov, R. Gupta, and M. Hashmi, “A Performance Enhanced Dual-band Wireless Power Transfer System for Practical ISM Bands,” in 2019 IEEE Asia-Pacific Microwave Conference (APMC), 2019, pp. 1259–1261.
[53] R. Gupta, O. Shaikenov, S. Kairatova, K. Dautov, and M. Hashmi, “Dual-Frequency Impedance Transformer with Ultra-High Impedance Transformation,” in 2019 IEEE Asia-Pacific Microwave Conference (APMC), 2019, pp. 458–460.
[54] S. Verma, D. Rano, and M. Hashmi, “A Novel Dual Band Defected Ground Structure for Short Range Wireless Power Transfer Applications,” in 2019 IEEE Wireless Power Transfer Conference (WPTC), 2019, pp. 188–191.
[55] V. Sharma and M. Hashmi, “Effective Blood Bank Management System based on Chipless RFID,” in 2019 IEEE Indian Conference on Antennas and Propogation (InCAP), 2019, pp. 1–4.
[56] K. Dautov, M. Hashmi, S. Verma, and R. Gupta, “Highly-efficient Compact Size DGS-based Wireless Power Transfer for Low-Power Sensor Nodes,” in 2019 IEEE MTT-S International Microwave and RF Conference (IMARC), 2019, pp. 1–4.
[57] D. Kupreyev, K. Dautov, M. Hashmi, and S. Verma, “Design of a Compact DGS Dual-band RF WPT System for Low Power Applications,” in 8th Asia-Pacific Conference on Antenna and Propagation, 2019, pp. 1–2.
[58] A. Kafizov, D. Rano, M. Hashmi, and D. Kupreyev, “End-fire Yagi Antenna with DGS for WBAN Applications,” in 8th Asia-Pacific Conference on Antenna and Propagation, 2019, pp. 1–2.
[59] V. Sharma and M. Hashmi, “Blood Bank Management based on Chipless RFID,” in 2019 8th Asia-Pacific Conference on Antennas and Propagation (APCAP), 2019, pp. 189–190.